Features
Nakamura's circular saw blades is equipped with super carbide blade, the material for the China top raw material. Using the latest production techniques and the best materials, the Nakamura blades feature micro grain TCT tips and resin damped laser cut plates, which substantially reduce noise whilst cutting.
The rip cut blades feature Alternate Top Bevel (ATB) ground teeth, ensuring a clean, fast cut. The tops of the teeth are bevelled alternately at approximately 15 degrees. This tooth configuration bears a sharp pointed tip that provides a neat clipping action for very fine finishes. Two teeth will span the entire width of the kerf. It produces very low cutting pressures that almost eliminate the tendency to tear out. The chips fall free in the chip spaces created by the large side clearance angles.
- Teflon Non-stick Coating protects from heat, gumming, & corrosion;
- Super thin laser cut kerf for fast, durable, and clean cuts;
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability;
- Hardened Steel Body – warrants a longer life and sharper cutting edge.
parameter
|
Series |
Specification |
Outer Diameter (Ømm) |
The number of teeth (P) |
Bore (Ømm) |
Teeth |
|
Impact Series |
105*18T*20 |
105 |
18 |
20 |
ATB(BC) |
|
110*40T*20 |
110 |
40 | |||
|
125*30T*20 |
125 |
30 | |||
|
180*60T*25.4 |
180 |
60 |
25.4
|
||
|
205*80T*25.4 |
205 |
80 | |||
|
230*40T*25.4 |
230 |
40 | |||
|
255*60T*25.4 |
255 |
60 | |||
|
305*40T*30 |
305 |
40 |
30 |
||
|
400*60T*30 |
400 | 60 |
DETAILS
Safety Protection
When using a 355mm circular saw blade for plywood, it is important to ensure proper safety precautions are taken. Always wear protective gear, such as safety goggles and gloves, to prevent any potential injuries. It is also essential to follow the manufacturer's instructions for blade installation and usage to ensure optimal performance and safety.
Tungsten Carbide-tipped (TCT) Blades
Tungsten carbide-tipped (TCT) blades are commonly used for cutting plywood due to their long-lasting sharpness and resistance to wear and tear. These blades can withstand the high speeds and friction generated during cutting, ensuring that they maintain their cutting efficiency over time.
Application
Hot Tags: 355mm circular saw blade for plywood, China 355mm circular saw blade for plywood manufacturers, suppliers, factory, carbide tipped circular saw blade, Steel Blade Weed Eater, Carbide Tipped Saw Blades, circular saw blade, Carbide Metal Cutting Saw Blade, 184mm Fibre Cement Blade