Features
Nakamura 10" 48Tooth non ferrous metal cutting blade features a specially formulated cermet that lasts longer than 20% and leaves clean, burr-free cuts in all types of ferrous metals such as Cast Iron, Steel, Stainless, Steel, Titanium, Nickel and Wrought Iron. It produces very few sparks and little heat, allowing the cut material to be handled quickly.
This non ferrous metal cutting blade allows easy cutting through metal rods, rebar, steel sheets, steel pipes, channels, and lasts longer than abrasive discs. It is suitable for high-precision plastic and soft-metal cutting delivers accuracy and resists bending and deflection for true cuts.
parameter
|
Series |
Specification |
Outer Diameter(Ømm) |
Thickness of tip |
Thickness of blade body |
Bore |
Number of teeth |
Teeth |
|
GARO |
110*1.5*1.1*22.23*28P |
110 |
1.5 |
1.1 |
22.23 |
28 |
BT |
| 148*1.6*1.2*22.23*40P | 148 | 1.6 | 1.2 | 40 | |||
| 255*2.0*1.6*25.4*48P |
255 |
2.0 |
1.6 |
25.4 |
48 |
||
| 355*2.2*1.8*25.4*66P | 355 | 2.2 | 1.8 | 66 | |||
| 405*2.8*2.5*40*90P | 405 | 2.8 | 2.5 | 90 |
Product Details
Imported Japanese Cermet Tipped
· Lasts up to 30 times longer than abrasive disks for cutting unhardened ferrous metal.
· Makes true, flat cuts in standing seam metal roofing and metal building panels without burning paint or protective coatings.
Safety Tips
· NEVER run the blade on a saw that is rated higher than the MAX RPM stated on the blade;
· Always wear proper PPE to include (but not limited to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on your machine.
Widely Used
- Carbide/Cermet tipped design for cleaner cuts and longer cutting life
- For cutting plastics and non-ferrous metals such as aluminum, brass, copper, etc.
Application
Hot Tags: non ferrous metal cutting blade, China non ferrous metal cutting blade manufacturers, suppliers, factory