Zhejiang Zhongcun Precision Cutter Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of 24t tct saw blade in China, featured by quality products and good service. Welcome to wholesale CE approved 24t tct saw blade from our factory. Contact us for customized service and OEM service.
↵
Features
The Akuma Series 165mm 24T TCT blade is designed for productivity-first wood cutting. The 24-tooth configuration is ideal for ripping, sizing and rough cuts where higher feed rates matter. ATB(BC) tooth geometry supports smooth entry and efficient chip evacuation, while the Teflon coating helps reduce friction, heat and resin build-up for more stable continuous cutting.
- 24T setup: fast ripping blade, deep gullet, optimized for speed on ripping, sizing and jobsite cuts.
- ATB(BC) grind: smooth entry with efficient chip evacuation on wood materials.
- TCT tips: improved wear resistance for longer service life.
- Teflon coating: reduces friction, heat and resin build-up.
- Dual expansion / noise-reduction slots (if applicable): helps reduce vibration and noise (describe your real design).
- Cutting Materials: wood, OSB, MDF, engineered wood.
- OEM options: bore size/tolerance, artwork and packaging available.
parameter
|
Diameter |
165mm (6 1/2") |
|
Kerf / Tip thickness |
1.5mm |
|
Plate thickness |
1.0mm |
|
Bore |
15.88mm |
|
Tooth grind |
ATB(BC) Tooth |
|
Coating |
Teflon |
|
Cutting Materials |
wood, OSB, MDF, engineered wood |
|
Max RPM |
10000 |
- Optional tooth count: 40T for a finer finish. For other bores/specs, send your saw model and arbor size for a matching recommendation.
DETAILS
Design highlights
- Noise/vibration reduction slots (e.g., dual slots): helps stabilize cutting and reduce noise.
- 24T configuration: built for faster ripping and sizing cuts.
Cutting performance
- 24-Tooth framing saw blade, higher productivity on wood, OSB and MDF.
- Coating helps reduce friction and anti-sicking for more stable continuous cutting (results depend on conditions).
Compatibility & tips
- Confirm bore/arbor match and keep flanges clean for proper clamping.
- For MDF/panels, optimize RPM and feed rate to avoid overheating and gumming.
Application
- Materials: solid wood, OSB, MDF, engineered wood.
- Recommended use: jobsite cutting, fast sizing, ripping and general woodworking.
- Not recommended: long runs on nail-embedded materials; use dedicated multi-purpose/nail-cut blades if needed.
Factory Show
We run batch-level QC checks (e.g., runout/balance, brazing strength, tooth geometry & tolerance, coating adhesion-replace with your real checklist). For retail/wholesale supply, barcode-ready packaging and carton labeling are available
Hot Tags: 24t tct saw blade, China 24t tct saw blade manufacturers, suppliers, factory, Cermet Tipped Saw Blades, circular saw blades for wood, , 185mm Multipurpose Circular Saw Blade, Weed Eater Blade For Cutter, Circular Saw Blade For Cutting Plywood