Zhejiang Zhongcun Precision Cutter Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of 7-1/4 25t wood framing ripping circular blades in China, featured by quality products and good service. Welcome to wholesale CE approved 7-1/4 25t wood framing ripping circular blades from our factory. Contact us for customized service and OEM service.
Features
- 25T Framing Blade = Rapid Ripping: low tooth count + larger gullets for faster ripping/rough cuts.
- Lower heat build-up: smoother chip evacuation helps reduce bog-down and scorching risk (with proper RPM/feed).
- Teflon anti-stick coating: less friction and gumming-especially on resinous or treated lumber.
- Thin-kerf efficiency: less load on handheld/jobsite circular saws.
- Construction Sawmill Quality stability: plate flatness & tensioning for reduced wobble/wandering.
- OEM/ODM: packaging, printing, and spec customization.
- Remove/replace the "angle grinders" compatibility line; position it for handheld/jobsite circular saws instead.
parameter
|
Diameter |
184mm(7-1/4") |
|
Kerf / Tip thickness |
1.6mm |
|
Plate thickness |
1.0mm |
|
Bore |
15.88mm / 20mm (Custom) |
|
Tooth Count |
25T |
|
Coating |
Teflon anti-stick |
|
Tooth Grind |
BA5 |
|
Max RPM |
10000RPM |
|
Cutting Materials |
OSB, plywood, MDF, laminated timber, softwood |
DETAILS
Anti-Stick & Lower Heat
The Teflon anti-stick coating helps reduce friction and resin build-up to minimize gumming and scorching risk (depending on material, RPM, and feed).
Why 25T for Framing/Ripping?
With larger gullets, a 25T design supports faster ripping/rough cutting and smoother feed, reducing bog-down and heat build-up for jobsite productivity.
Application
Recommended materials: framing lumber ripping/rough cuts, fast sizing OSB/plywood, selected composite boards.
Not recommended: metal cutting, sand-contaminated reclaimed wood, nail-embedded stock (safety & life impact).
Factory Show
- Plate material & flatness control: plate preparation with flatness/stress control to reduce wobble and wandering at speed.
- Tensioning (stability tuning): tension adjustment for thin-kerf and fast jobsite ripping to improve cutting stability.
- Tip brazing process: focus on joint consistency and integrity to reduce tooth loss risk; abnormal lots are isolated.
- Grinding & geometry consistency: controlled tooth geometry for smoother feed and chip evacuation in ripping/rough cuts.
- Balance/runout checks: inspection of key indicators before shipment to reduce vibration risk in high-RPM use.
Hot Tags: 7-1/4 25t wood framing ripping circular blades, China 7-1/4 25t wood framing ripping circular blades manufacturers, suppliers, factory, 165mm Wood Cutting Circular Blade, 184mm 45T Carbide Circular Blade, 125MM 24T Wood Working Saw Blade, Round Saw Blade For Melamine, 184MM Circular Woodworking Saw Blade, 185mm Carbide Teeth Circular Saw Blade