As a special tool for circular sawing machine, cemented carbide saw blade is not only associated with sawing cost, but also the basis for cutting the quality of the workpiece
1. Daily maintenance
Do alloy saw blades also need maintenance? Yes, any product needs to be maintained, although the product is a kind of knife, but it is also a consumable, if there is no reasonable maintenance, the impact is not only its sharp wear and tear too fast, but also the reduction of the company's own quality!
1. Corresponding models and equipment
Alloy saw blades have strict requirements, different models correspond to different equipment, can not be matched at will, for example: cut metal saw blades, used to sawing wood, this is a very conventional mistake, some laymen think that cutting metal can be, cutting wood should be faster, sharper! If the saw blade used on the metal circular saw machine is used to cut wood, the result is jamming and chipping, and the saw blade consumption is too large and the cost is too high.
2. Grasp the time of replacing the saw blade
Tungsten carbide saw blade is a consumable, has its service life, many companies think that when cutting processing, if the service life has not arrived, it will not be replaced, directly can not be used! Indeed, this is one of the things that all businesses are doing, thinking that it is normal and reasonable, but they don't know that this is a very lazy practice;
If the life of a saw blade is to cut 40 squares, then it should be replaced when it is cut to 20 squares, so that after the break, at least 30 more squares can be cut, and people will be more energetic after resting, and the same is true for the product!
3. Correlation with its equipment
The quality of the metal circular saw machine equipment will also affect the quality of the saw blade, the coordination and compatibility between them are very important, and if the best saw blade is placed on the equipment of very poor quality, its efficacy will be discounted by at least half.
The equipment should not be sawed beyond the range of materials, which will not only affect the performance and stability of the equipment, but also the biggest damage is the cemented carbide saw blade, the same equipment should have its reasonable rest period, which can also drive the breathing time of the saw blade.
2. Grasp the details
Details are very important, often can determine the result, do not pay attention to this aspect of the enterprise, will not do too successful, at least the use of equipment and sawing costs are much higher than peers.
1. Before the end of the work, the saw blade must be carefully cleaned, and there should be no residue on it, which is conducive to the maintenance of its sharpness;
2. During the installation process, be sure to strictly abide by its technical guidance, and cannot be installed in reverse or reversed!
3. Before work, the corresponding equipment and materials must be checked, and the dirty sawing materials must be cleaned up in time;
4. In the process of work, if it is found to be very hot, it should not be sprayed directly with water, and oil mist should be used.
The above is the most basic maintenance method, if you want to delay the sharpness of the carbide saw blade, you must operate strictly according to the use requirements.