Each classification of metal circular saw blades has a characteristic, different metal materials have a corresponding metal circular saw blade, if conditions permit, it is recommended to divide different saw blades for each type of material, so that the use effect will achieve the best.
First, the detailed description of the general category of circular saw blades
From the general direction, circular saw blades are divided into two categories: one is woodworking saw blades, and the other is metal saw blades (of course, there are others, such as those used to cut stones, etc., which will not be detailed here)
As the name suggests, woodworking saw blades are used to cut wood, and this type of saw blade is older and more diverse than other classifications.
Metal circular saw blades are used to sawing metal materials, and the model specifications and technical content requirements are high.
Woodworking saw blades, here is not too much introduction, mainly to detail some of the classification and corresponding effects of metal circular saw blades.
Second, the use of metal circular saw blades classification and efficacy
In terms of materials, metal circular saw blades can be mainly divided into: high-speed steel, ceramic steel, alloy steel, tungsten steel, etc.; In terms of efficacy, it can be divided into: cutting aluminum, cutting stainless steel, cutting high and low carbon steel and ordinary steel, etc.; In terms of performance, it can be divided into: coated and non-coated; The name can be divided into: high-speed steel saw blade, cold saw (cermet saw blade), cemented carbide saw blade (whole and alloy), etc., which are usually suitable for all kinds of metal material cutting processing equipment.
1. High-speed hacksaw blade
Mainly used for: pipe cutting machine equipment, sawing pipe effect is excellent;
2. Alloy saw blade
Mainly used for: cutting processing of aluminum profiles, with excellent effect;
3. Ceramic hacksaw blade (cold saw blade)
Mainly used for: all kinds of metal materials, at present, it is the most top-level metal circular saw blade, the price is relatively expensive, but the effect is very good;
4. About non-ferrous metal circular saw blades
Mainly used in: non-ferrous metals, aluminum alloy pipes, extrusion profiles, polymer plates, iron pipes, iron rods, etc.;
5. Coated saw blades
Mainly used for: sawing soft metal bars and thick soft metal pipe sawing, the metal circular saw blade of the sawtooth is treated by multi-layer coating special technology, can reach 3500 hardness, the coating also has a lubricating effect, improve the effect of chip removal and reduce the noise, as well as special treatment to avoid excessive friction and other problems caused by overheating and deformation of the substrate and other related problems.